Home >
Product Code: SKU
Details:
- Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.
- Clean up with warm, soapy water
- Coverage: 75 sq. ft./pint; 150 sq. ft./quart; 600 sq. ft./gallon.
- Thinning: If necessary, thin with 10-20% water.
- Oil based stains must be completely dry before using a water based top coat. Wait a minimum of 48 hours before applying GF High Performance.
- Use a foam brush or paint pad applicator. Apply liberally using smooth, even strokes going with the grain. Use enough material to provide a wet film.
- Sand between coats using 320 or 400 grit sandpaper. Remove dust before recoating.
- A minimum of 3 coats is recommended. Additional coats may be applied to increase durability and depth.
EF Extender(#80728) is used to open or increase the dry time of water base stains and finishes. Use EF Extender when conditions are extremely hot or dry. Also, when staining a large project, EF Extender helps provide more working time.
Note: Simply mix 10% to 15% (3-5 fl. oz. per qt.) of EF Extender with any water base stain or finish and mix well.
Discount Price:
Home >
