Home >
Product Code: SKU
To achieve a smooth surface:
- Sand surface thoroughly and clean with a tack cloth.
- Stir before using. Apply a full even coat of filler across the surface, rubbing into the grain. Work a small area at a time, i.e. a drawer front, chest side etc.
- Allow to set 3-5 minutes.
- Remove excess filler by drawing a plastic or hard rubber straight edge across the grain. Remove any residue with burlap or a coarse cloth. DO NOT WIPE WITH THE GRAIN.
- Allow the filler to dry overnight.
- Sand to desired texture, leaving the filler only in the grain. Note: Filler belongs in the grain, not on the surface. Filler on the surface will inhibit staining.
- Clean with a tack cloth before staining or applying a finish.
- In some instances a second application will further improve the surface, especially on deep-grained wood.
- NOTE: Filling can be done before or after staining.
- Do not thin.
Please note that this item can only be shipped to addresses within the continental United States by UPS Ground only.
Discount Price:
Home >
