Home >
Product Code: SKU
- Type: Synthetic elastomeric polymer.
- Weight/gallon: 9.0 lbs.
- State: Medium-viscosity mastic.
- Flashpoint: Less than 0"F.
- Color: Light tan.
- Freeze/thaw stability: Will not freeze.
- Solids: 65%.
- Viscosity: 130,000 cps.
- Storage life: 12 months in tightly closed containers at 75"F.
- Calculated VOC (less exempt solvent): 282 g/L.
Application Guidelines...
- Application temperature: 0"F. to 100"F.
- Service temperatures: -20"F. to 120"F.
- Method of application: Cartridge/caulking gun
- Working time: Approx. 20-30 minutes for a 1/4" bead
- Working surfaces Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion.
- Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded.
- NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association.
- Cleanup: Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor’s precautions when using solvents.
- NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
Maximum Coverage 10.5 oz. Cartridge:
- 1/8" bead — 129 ft.
- 1/4" bead — 32 ft.
- 3/8" bead — 14 ft.
Maximum Coverage 29 oz. Cartridge:
- 1/8" bead — 355 ft.
- 1/4" bead — 89 ft.
- 3/8" bead — 39 ft.
Discount Price:
Home >
