Home Bar Plan and Hardware | Woodworking Showcase

Behind this traditional frame and panel bar are two drawers and two doors where you can conveniently store your bar supplies and liquor. The overall completed size of the bar is 72" long by 38-1/2" high by 24" deep. The shop-tested plan includes full-size patterns for all shaped pieces, a detailed exploded view, step-by-step instructions, a complete material list, and elevation drawings.

The mirror unit in back of the bar features glass racks (sold separately) above, and a railing (sold separately) for displaying and storing your bottles beneath the mirror. Use our cherry gallery spindles for making a decorative railing to keep your bottles in place. The completed mirror unit measures 72" wide by 41-1/8" high by 10" deep.

The brass foot railings are what really turn an ordinary counter into an authentic bar. We offer the professional railing hardware used by the most stylish bars and restaurants. Four brass rail hardware kits are available, a 6' and a 10' kit, in both 1-1/2" or 2" diameter. Both kits include brass tubing, combination brackets and end caps. All items are solid brass, and all except the tubing is lacquered.

A 6' kit is for the front of the bar only. It includes:

1 each - 6' Brass Railing (N) see image below
3 each - Brass Combination Bracket (W) see image below
2 each - Brass Rail End Cap (Y) see image below

A 10' kit wraps around the sides of the bar and includes two brass elbows.

1 each - 6' Brass Railing (N) see image below
1 each - 4' Brass Railing (Not sold separately)
5 each - Brass Combination Bracket
2 each - Brass Rail End Cap
2 each - Brass Rail Elbow

Choose between 1-1/2" or 2" diameter Brass Tube Rails.

Bar Mirror Plan Also Requires:

2 each - Door Pulls - Brass Finish - 3"
2 each - Drawer Knobs - Brass Finish - 1-1/2"
2 Pair - Drawer Slides - Full or 3/4 Extension
8 each - 1/4" Shelf Pins
2 pair - Full Overlay Hinges - Brass Finish
1 each - #74032 Sink - 6" x 13" x 14"
1 each - Brass Toe Rail - 1-1/2" x 23" x 72" (N) see image below
5 each - Brass Toe Rail Brackets (W) see image below
2 Brass Rail Elbow (L) see image below
2 Brass Rail End Caps (Y) see image below
Wood Screws - #8 x 1-1/4" and #8 x 2"
1 package - Wood Plugs to match the wood you choose
1 roll - Veneer Tape to match the wood you choose - 8' x 1-9/16"
Bar Molding - Pre Made or you can make your own
- 2 each - Sides - 2-1/2" x 4-3/8" x 24-1/4"
- 1 each - Front - 2-1/2" x 4-3/8" x 71-5/8"
13 each - Stemware Holders - 3/4" x 3" x 7" - Pre Made or you can make your own - .
Crown Molding - Pre Made or you can make your own
- 2 each - Ends - 3/4" x 2-9/16" x 10-1/8"
- 1 each - Front - 3/4" x 2-9/16" x 64-1/8"
1 each - Gallery Molding - 3/8" x 3/4" x 60-3/4"
15 each - Gallery Spindles
Wood Screws - #8 x 2" and #8 x 1-1/4"
20 each - #20 Joining Biscuits
25 each - 3/8" Wood Plugs to match the wood you choose
6 each - 3/8" Wood Buttons to match the wood you choose

#74032 - Stainless Steel Dry Sink
Build this sink into the service counter of your bar and fill it with ice to cool refreshments. Actually this dry sink offers many uses. In addition to cooling refreshments, you can use it to store and transport glasses and utensils. Made of 22 gauge stainless steel. Measures 13-7/8" by 12-3/4" by 6".

Additional Bar Hardware found here...

Bar Mirror Plan Also Requires:

Woodworking Showcase | Woodworking Showcase Sitemap